Technical indicators

Metallographic grinding and polishing machine is controlled by single chip microcomputer. The dirt collecting plate and safety cover are made of ABS material. The appearance is novel and beautiful. Double disc adopts stepless speed regulation, can also be four speed control, and the grinding disc revolution independent operation; Grinding direction can be selected forward or reverse rotation, to ensure that the sample level off and smooth. The device adopts HD LCD touch screen, which makes the operation more convenient and intuitive. Motor adopts DC brushless motor, no need to change the brush frequently, and long service time; The site is cast in precision cast iron to ensure the balance of rotation and enhance stability during operation. The spindle adopts leakproof design to ensure that the bearing is not damaged; The equipment supports quick plate change, spray Teflon on the pad, replace sandpaper or throw cloth to ensure no residue; Low noise, easy operation and safety.

Metallographic grinding and polishing machine technical parameters

Diameter of grinding disc: 254mm
Diameter of sandpaper: 250mm
Z-cycle grinding depth: 0.1mm, step 0.1mm
Grinding direction: forward/reverse
Speed: stepless speed regulation of 100~1000r/min (10r/min step)/can also be four speed 250 r/min, 500 r/min, 750 r/min, 1000r/min
External diameter of water supply pipe: 6mm
Water supply pressure: 40~100psi
Motor: brushless DC motor,220V, 1.1KW
Dimensions: 725×900×360mm
Net weight: 95kg.